OpenGND
Open Customizable Hardware
MECHANICAL & 3D CAD·6 min read·Updated 2026-11-17

SKU-02 Voice Base: Mechanical .STEP Datum, Acoustic Porting & .3MF Guide

Mechanical design rules for modeling custom 3D-printed shells around the OpenGND_BK7258_Core_Mount_v1.step acoustic module without degrading Hardware AEC voice barge-in.

1. Why Separate the Acoustic Core from the Outer Shell?

Full-duplex conversational AI requires tight acoustic isolation between the speaker cone and the microphone array. When hobbyists hot-glue raw speakers and MEMS mics into hollow PLA prints, internal sound waves couple directly into the mic capsule—defeating echo cancellation.

SKU-02 solves this by sealing the BK7258 SoC, tuned speaker chamber, and silicone-booted microphones inside a calibrated inner puck (Core Module), while releasing the outer mechanical mounting standard under CC-BY-4.0.

2. FDM Clearance & Acoustic Port Rules

Download OpenGND_BK7258_Core_Mount_v1.step from /explore and follow these four design constraints when creating custom shells for MakerWorld or Printables:

Feature ZoneRecommended SpecAcoustic / Mechanical Reason
Outer Perimeter Clearance+0.15 mm to +0.20 mm radialEnsures smooth slip-fit on 0.4mm nozzle consumer FDM printers without elephant-foot binding.
Mic Port ChannelØ 2.2 mm min, < 3.5 mm tunnel depthDeep narrow tunnels create Helmholtz resonance peaks that color ASR accuracy.
Speaker Grille Open Area>= 38% open slot ratioPrevents back-pressure muffling and preserves natural voice clarity.
USB-C Rear Window12.6 mm × 6.8 mm stadium recessAccommodates thick braided aftermarket USB-C overmolds.

3. Recommended FDM Slicer Profile (< 2 Hours)

All 6 official OpenGND .3MF enclosures are engineered to print in under 2 hours on Bambu Lab A1 / P1S / X1C or Prusa MK4 printers:

  • Layer Height: 0.20 mm standard (0.16 mm adaptive on curved top domes)
  • Wall Loops: 3 perimeters (prevents thin-wall cabinet buzz during speaker playback)
  • Infill: 15% Gyroid (isotropic damping, avoids rectilinear rattle)
  • Material: Matte PLA for indoor desks; PETG or ASA for warm monitor-top mounts