{
  "schemaVersion": "3.4.0",
  "updatedAt": "2026-11-20T09:55:00Z",
  "platform": "OpenGND Studio",
  "devices": [
    {
      "id": "sku-01",
      "slug": "sku-01-smart-clock",
      "skuCode": "SKU-01",
      "name": "OpenGND Smart Clock (ESP32-S3)",
      "mcu": "ESP32-S3-WROOM-1U-N16R8 (16MB QIO Flash + 8MB Octal PSRAM)",
      "status": "Released (Hardware Ready)",
      "openness": "Open Firmware + Zero-Code Skin Studio",
      "primaryMethod": "8-Firmware SW4 Switcher + WebOTA + .gndskin Hot-Swap",
      "supportsWebSerial": true,
      "defaultHostname": "http://opengnd-clock.local/update",
      "amazonUrl": "https://www.amazon.com/HOTMIND-Assistant-Control-AI-Generated-Humidity/dp/B0H6KGC3N3",
      "webOtaSteps": [
        {
          "step": 1,
          "title": "Flash OpenGND Wireless Unlock Bridge (Partition-Safe 0x10000)",
          "detail": "Back up your retail HOTMIND ESP32-S3 Smart Clock (B0H6KGC3N3) over USB-C via esptool read_flash, then flash opengnd-clock-unlock-bridge.bin (v1.4.1) @ 0x40000 (clearing otadata @ 0x35000). It preserves fctry (0x11000) & ft_state (0x3B000) untouched and latches RTC_GPIO7 soft-power hold."
        },
        {
          "step": 2,
          "title": "Scroll & Switch Across All 8 Firmwares On-Device (8-Firmware SW4 Switcher) or WebOTA",
          "detail": "Short-press right Settings (SW4 IO18) to open SETTINGS_MENU (8-Firmware SW4 Switcher): spin the top knob (IO47/21) across all 8 official SKU-01 firmwares (AgentHUD v2.4.1, Agora Live AI Clock v1.0.0, VoxDeck v1.1.1, PocketNote v1.1.1, FlipTicker v2.1.1, Daily AI Clock v1.4.1, Clock AI-KVM v1.4.0, Unlock Bridge v1.4.1) and press IO14 for 1.5s offline Dual-OTA Fast Swap (ota_0 <-> ota_1) or Wi-Fi HTTPS Cloud Self-OTA pull (test.opengnd.com -> opengnd.com), or browse http://opengnd-clock.local/update."
        },
        {
          "step": 3,
          "title": "Unified 3-Key Dial, 0V Battery Cut & Type-C Download Mode",
          "detail": "Every Wave 3C SKU-01 build runs the 8-Firmware SW4 Switcher (ognd_fw_switcher) + ognd_pwr_sup + 2-stage WDT_RWDT (15s RESET_SYSTEM -> +5s RESET_RTC): short-press SW3 (IO48) returns/closes menu, hold SW4 >= 4.0s or SW4+SW3 >= 2.0s cuts battery to 0V, hold SW3+IO14 >= 2.5s (or SW3 3..6.99s) soft-reboots, and hold SW3 >= 7.0s runtime (>= 4.0s boot) enters 120s-RWDT Type-C USB Download Mode (1.5..3.9s for Safe-Mode AP)."
        }
      ],
      "cliFallback": "esptool.py --chip esp32s3 --before no_reset --after hard_reset write_flash 0x40000 opengnd-clock-agent-hud.bin",
      "packages": [
        {
          "id": "sku01-agent-hud",
          "filename": "opengnd-clock-agent-hud.bin",
          "title": "OpenGND AgentHUD — Claude Code · Codex · Antigravity Hardware Co-Pilot",
          "version": "v2.4.1",
          "channel": "Recommended",
          "license": "Apache-2.0",
          "size": "5.43 MB (5,695,120 B)",
          "sizeBytes": 5695120,
          "offset": "0x40000",
          "sha256": "76e70c143bcbb44ddaaaf77f5d25b8732d432191abaf974d7c58e9f0054e2e12",
          "bridgeCommand": "npx @opengnd/agent-hud init",
          "bridgeLabel": "AgentHUD v2.4.1 Tri-Agent Bridge (Claude Code · OpenAI Codex CLI · Google Antigravity + 8-Tool MCP)",
          "repoUrl": "https://github.com/opengnd/sku-01-clock-esp32",
          "desktopAppUrl": "/downloads/OpenGND-Hub-3.0.4-macos-arm64.dmg",
          "desktopAppLabel": "Download OpenGND Hub v3.0.4 (.dmg)",
          "desktopAppSize": "4.40 MB (4,614,766 B)",
          "desktopAppSha256": "ae73ee1ae557e3d81b679ef8091e2fee0896c668b62d39c410e25d59f1c3ab86",
          "summary": "AgentHUD v2.4.1 physical desk co-pilot firmware for Claude Code, OpenAI Codex CLI, and Google Antigravity (agy) on ESP-IDF v6.1—fixing the Stop hook task-completion voice celebration trigger and embedding 4 built-in neural default human voices per language across all 8 languages (Warm Female, Clear Male, Bright Female, Deep Male), alongside up to 16 newest-first concurrent tasks in a dynamic 6-row windowed THREAD_LIST, ES8311 REG32 hardware dB volume calibration + live debounced Web/Desktop volume sync, configurable 5-mode rotary knob (auto, scroll_content, switch_sessions, volume, pomodoro), localized persona names across 8 languages, streamlined 3-mode sound sources & Done/Confirm/Notify scene rules, multi-harmonic ADSR Signature Sound Studio & Cloud AI Text-to-SFX + Voice Cloning + Multi-Voice TTS (16kHz 4-bit IMA-ADPCM), and the /configure 4-protocol web configurator (opengnd.device.config.v1). Built atop crisp 4bpp 16-level grayscale antialiased multi-size typography (16px/12px/28px Helvetica Neue + PingFang SC/TC) and 40 MHz SPI3 display bus signal integrity, paired with OpenGND Hub v3.0.4 (.dmg) + 6×5 88×88 mascots + custom avatar upload + PackBits16 Rich Cards + ES8311/ES7210 voice + 8-Firmware SW4 Switcher & WDT_RWDT 0V protection.",
          "highlights": [
            "v2.4.1 Stop Hook Voice Trigger Fix & 4 Built-in Neural Voices/Lang: Reliable Stop completion celebration audio + 32 pre-built neural default human voices (4 styles × 8 languages, 0 credits) synced via audio.system_voice_name",
            "OpenGND Hub v3.0.4 (.dmg) & /configure Portal: Canonical opengnd.device.config.v1 across USB WebSerial, LAN HTTP, Cloud Relay & Desktop + 5-mode knob, 16-session THREAD_LIST, ADSR Studio & Cloud Text-to-SFX / Voice Cloning",
            "4bpp 16-level grayscale antialiased multi-size fonts (16px/12px/28px Helvetica Neue + PingFang SC/TC in XIP .rodata) + 40 MHz SPI3 signal integrity + 6 Cartoon Desk Pets + Custom Avatar Upload (NVS)",
            "ES8311/ES7210 16kHz speak/listen + 8-tool stdio MCP + 8-Firmware SW4 Switcher + 2-stage WDT_RWDT (15s+5s), 0V battery cut & 120s-RWDT Type-C download"
          ],
          "downloadUrl": "/firmware/opengnd-clock-agent-hud.bin",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/sku-01-clock-esp32-src.tar.gz",
          "sourceArchiveSize": "3.14 MB (3,293,940 B)",
          "sourceArchiveSha256": "6e623eb9d98d215f540f961dc507ed0036e7413d8fa2e30de3a166718f3e04eb",
          "desktopAppWindowsUrl": "/downloads/OpenGND-Hub-3.0.4-windows-x64-setup.exe",
          "desktopAppWindowsLabel": "Download OpenGND Hub v3.0.4 (Windows x64 .exe)",
          "desktopAppWindowsSize": "3.78 MB (3,958,904 B)",
          "desktopAppWindowsSha256": "5c0d4c38389754c03886df4031d3c93d3d72da805b31e6a4d9cfba4a7f546535"
        },
        {
          "id": "sku01-convoai-clock",
          "filename": "opengnd-clock-convoai.bin",
          "title": "OpenGND AI Desk Buddy — ConvoAI Clock + TF Card + Clock Tools",
          "version": "v1.1.0",
          "channel": "Recommended · Pure Hardware",
          "license": "Apache-2.0",
          "size": "4.59 MB (4,817,040 B)",
          "sizeBytes": 4816688,
          "offset": "0x40000",
          "sha256": "eaf963188fbb29610429a56f7094a6159a91676d81c63f6bee1b18d1759fcf38",
          "repoUrl": "https://github.com/opengnd/sku-01-clock-esp32/tree/main/firmware/convoai-clock",
          "summary": "Standalone AI Desk Buddy firmware (v1.1.0, ESP-IDF v6.1) with 256MB+ TF card storage (/sdcard/opengnd/{config,audio,recordings}), persistent alarms & countdown timers (/api/v1/tools/exec), 5-row Settings menu with on-device TF recorder & dual-slot firmware switch, unified r=10 Home cards, and 2-stage WDT_RWDT 0V battery safety.",
          "highlights": [
            "v1.1.0 TF Card & Alarms: 1-bit SDMMC /sdcard mount, persistent alarms/timers & hardware Function Calling RPC (/api/v1/tools/exec)",
            "5-Row Settings & Polished Home UI: Volume, Brightness, Auto-Brightness, TF Recorder & Firmware/Power Switcher + 16px CJK guide",
            "OpenGND Hub v3.0.4 (macOS + Windows x64): Visual Clock Tools panel with <7B / 7B+ / 14B+ / Cloud model readiness advisor",
            "8-Firmware SW4 Switcher + 2-stage WDT_RWDT (15s+5s), true 0V battery cut & 120s-RWDT Type-C download"
          ],
          "downloadUrl": "/firmware/opengnd-clock-convoai.bin",
          "downloadAvailable": true,
          "desktopAppUrl": "/downloads/OpenGND-Hub-3.0.4-macos-arm64.dmg",
          "desktopAppLabel": "Download OpenGND Hub v3.0.4 (.dmg)",
          "desktopAppSize": "4.40 MB (4,614,766 B)",
          "desktopAppSha256": "ae73ee1ae557e3d81b679ef8091e2fee0896c668b62d39c410e25d59f1c3ab86",
          "desktopAppWindowsUrl": "/downloads/OpenGND-Hub-3.0.4-windows-x64-setup.exe",
          "desktopAppWindowsLabel": "Download OpenGND Hub v3.0.4 (Windows x64 .exe)",
          "desktopAppWindowsSize": "3.78 MB (3,958,904 B)",
          "desktopAppWindowsSha256": "5c0d4c38389754c03886df4031d3c93d3d72da805b31e6a4d9cfba4a7f546535"
        },
        {
          "id": "sku01-voxdeck",
          "filename": "opengnd-clock-voxdeck.bin",
          "title": "OpenGND VoxDeck — 6-Pad Tactile Macro Deck, Cursor Dictation & PIN 2FA",
          "version": "v1.1.1",
          "channel": "New Release",
          "license": "Apache-2.0",
          "size": "4.51 MB (4,731,920 B)",
          "sizeBytes": 4731920,
          "offset": "0x40000",
          "sha256": "f688e6ec9780c42dcda82a84360370bed60a971c0d8af3d7130c9699a4780531",
          "repoUrl": "https://github.com/opengnd/sku-01-clock-esp32",
          "desktopAppUrl": "/downloads/OpenGND-Hub-3.0.4-macos-arm64.dmg",
          "desktopAppLabel": "Download OpenGND Hub v3.0.4 (.dmg)",
          "desktopAppSize": "4.40 MB (4,614,766 B)",
          "desktopAppSha256": "ae73ee1ae557e3d81b679ef8091e2fee0896c668b62d39c410e25d59f1c3ab86",
          "summary": "Turns SKU-01 into a 6-pad capacitive touch macro deck, global cursor voice-dictation trigger, and PIN-encrypted USB 2FA vault (ESP-IDF v6.1, v1.1.1) upgraded with crisp 4bpp 16-level grayscale antialiased multi-size fonts (16px/12px/28px Helvetica Neue + PingFang SC/TC) and 40 MHz SPI3 display signal integrity across its unified EN/简体中文/繁體中文 320×240 touch UI and dual-theme offline WebUI console. Pairs with OpenGND Hub v3.0.4 (.dmg) unified companion workspace for 6-pad custom keybindings/macros and instant voice-to-cursor dictation across any editor or terminal, enforces PIN-protected hardware USB 2FA credentials, and embeds the 8-firmware SW4 scroll switcher + 2-stage WDT_RWDT 0V battery safety.",
          "highlights": [
            "v1.1.1 Crisp Typography & Display Bus: 4bpp 16-level grayscale antialiased multi-size fonts (16px/12px/28px Helvetica Neue + PingFang SC/TC) + 40 MHz SPI3 signal integrity",
            "Tri-Lingual (EN/简/繁) 6-Pad Capacitive Macro Grid on 320×240 CST226SE IPS + dual-theme WebUI, configurable in OpenGND Hub v3.0.4 (.dmg)",
            "Global Cursor Voice Dictation: speak into ES7210 dual-mic AEC and stream transcribed text straight to your active OS cursor + PIN-Encrypted USB 2FA Vault",
            "7-firmware SW4 SETTINGS_MENU scroll switcher + 2-stage WDT_RWDT (15s+5s), 0V battery cut & 120s-RWDT Type-C download"
          ],
          "downloadUrl": "/firmware/opengnd-clock-voxdeck.bin",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/sku-01-clock-esp32-src.tar.gz",
          "sourceArchiveSize": "3.14 MB (3,293,940 B)",
          "sourceArchiveSha256": "6e623eb9d98d215f540f961dc507ed0036e7413d8fa2e30de3a166718f3e04eb",
          "desktopAppWindowsUrl": "/downloads/OpenGND-Hub-3.0.4-windows-x64-setup.exe",
          "desktopAppWindowsLabel": "Download OpenGND Hub v3.0.4 (Windows x64 .exe)",
          "desktopAppWindowsSize": "3.78 MB (3,958,904 B)",
          "desktopAppWindowsSha256": "5c0d4c38389754c03886df4031d3c93d3d72da805b31e6a4d9cfba4a7f546535"
        },
        {
          "id": "sku01-pocketnote",
          "filename": "opengnd-clock-recorder.bin",
          "title": "OpenGND PocketNote v2.0 — Standalone AI Recorder (3 Visual FX + Dynamic ASR + TF Card)",
          "version": "v2.0.0",
          "channel": "Recommended · Standalone Recorder",
          "license": "Apache-2.0",
          "size": "4.58 MB (4,798,624 B)",
          "sizeBytes": 4798352,
          "offset": "0x40000",
          "sha256": "300267e06f5678eec72ff8d7bc3bd14f3cefec80388f6dfb9a7692cc385bd470",
          "repoUrl": "https://github.com/opengnd/sku-01-clock-esp32",
          "desktopAppUrl": "/downloads/OpenGND-Hub-3.0.4-macos-arm64.dmg",
          "desktopAppLabel": "Download OpenGND Hub v3.0.4 (.dmg)",
          "desktopAppSize": "4.40 MB (4,614,766 B)",
          "desktopAppSha256": "ae73ee1ae557e3d81b679ef8091e2fee0896c668b62d39c410e25d59f1c3ab86",
          "summary": "Standalone zero-subscription AI Voice Recorder firmware (v2.0.0, ESP-IDF v6.1) running 100% independently on ESP32-S3: 3 switchable visual FX modes (Neon Spectrum Pulse, Retro Dual-Reel Cassette Deck, Live ASR Subtitle Screen), on-device ESP32 VAD-gated dynamic ASR (LAN local Whisper/SenseVoice HTTP first -> Cloud BYOK HTTPS fallback -> pure offline TF card), 8KB/s IMA-ADPCM .ognd (~8.5h on 256MB TF), on-device playback/bookmarks/delete, and 4x faster raw sync.",
          "highlights": [
            "3 Switchable Visual FX Modes: Neon Spectrum Pulse with falling peaks, animated Dual-Reel Tape Deck, and 16px Live ASR Subtitle screen",
            "ESP32 Standalone Dynamic ASR: 4.5s VAD-gated chunks straight to LAN Local Whisper (zero key) or Cloud BYOK, saving live .txt sidecars on TF card",
            "256MB+ TF Card Long-Duration Storage: 8KB/s IMA-ADPCM .ognd (~8.5h) + 1MB Flash fallback + .bm bookmarks + 4x faster /api/v1/recorder/raw sync",
            "OpenGND Hub v3.0.4 (macOS + Windows x64): Built-in LAN local ASR endpoint + one-click whisper.cpp model downloader & SD card manager"
          ],
          "downloadUrl": "/firmware/opengnd-clock-recorder.bin",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/sku-01-clock-esp32-src.tar.gz",
          "sourceArchiveSize": "3.14 MB (3,293,940 B)",
          "sourceArchiveSha256": "6e623eb9d98d215f540f961dc507ed0036e7413d8fa2e30de3a166718f3e04eb",
          "desktopAppWindowsUrl": "/downloads/OpenGND-Hub-3.0.4-windows-x64-setup.exe",
          "desktopAppWindowsLabel": "Download OpenGND Hub v3.0.4 (Windows x64 .exe)",
          "desktopAppWindowsSize": "3.78 MB (3,958,904 B)",
          "desktopAppWindowsSha256": "5c0d4c38389754c03886df4031d3c93d3d72da805b31e6a4d9cfba4a7f546535"
        },
        {
          "id": "sku01-geek-dashboard",
          "filename": "opengnd-clock-ticker.bin",
          "title": "OpenGND FlipTicker — Braun Split-Flap Clock, Markets, Sales & Homelab",
          "version": "v2.1.1",
          "channel": "New Release",
          "license": "MIT",
          "size": "4.50 MB (4,713,856 B)",
          "sizeBytes": 4713856,
          "offset": "0x40000",
          "sha256": "2a863c0a80966e8de74f995a3ee3659768b605a67fd5f9ba3e197033a5c19092",
          "repoUrl": "https://github.com/opengnd/sku-01-clock-esp32/tree/main/firmware/geek-dashboard",
          "summary": "Standalone v2.1.1 FlipTicker firmware upgraded with crisp 4bpp 16-level grayscale antialiased multi-size fonts (16px/12px/28px Helvetica Neue + PingFang SC/TC) and 40 MHz SPI3 display signal integrity, featuring unified EN/简体中文/繁體中文 on-device UI and Signal Orange dual-theme local console: combines a Braun-inspired split-flap desk clock, live line-chart sparkline market ticker, Stripe/Shopify Cha-Ching! order burst chime via the chambered NS4150B speaker, and Homelab / CI server status monitoring with rotary view switching, 7-firmware SW4 scroll switcher & WDT_RWDT 0V protection.",
          "highlights": [
            "v2.1.1 Crisp Typography & Display Bus: 4bpp 16-level grayscale antialiased multi-size fonts (16px/12px/28px Helvetica Neue + PingFang SC/TC) + 40 MHz SPI3 signal integrity",
            "Tri-Lingual (EN/简/繁) Braun Split-Flap Desk Clock & Dual-Theme Local WebUI on 320×240 IPS with ambient lux auto-dim",
            "Live Sparkline Market Ticker & Cha-Ching! Order Alerts: real-time equity/crypto sparklines + Stripe/Shopify NS4150B chambered coin chime",
            "Homelab & CI Monitor + 7-firmware SW4 scroll switcher + 2-stage WDT_RWDT (15s+5s), 0V cut & 120s-RWDT USB Download"
          ],
          "downloadUrl": "/firmware/opengnd-clock-ticker.bin",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/sku-01-clock-esp32-src.tar.gz",
          "sourceArchiveSize": "3.14 MB (3,293,940 B)",
          "sourceArchiveSha256": "6e623eb9d98d215f540f961dc507ed0036e7413d8fa2e30de3a166718f3e04eb"
        },
        {
          "id": "sku01-byok",
          "filename": "opengnd-clock-byok.bin",
          "title": "Open Daily Clock & BYOK AI Firmware (5-in-1 Customizable)",
          "version": "v1.4.1",
          "channel": "Stable",
          "license": "Apache-2.0",
          "size": "4.40 MB (4,616,768 B)",
          "sizeBytes": 4616768,
          "offset": "0x40000",
          "sha256": "fffc85b2e093e8752db1946d472ff0eeabff7d4df7a9623383b8a860b7e40fce",
          "repoUrl": "https://github.com/opengnd/sku-01-clock-esp32/tree/main/firmware/byok-ai-clock",
          "summary": "v1.4.1 5-in-1 customizable daily clock & 100% cloud-account-free BYOK AI firmware (ESP-IDF v6.1), upgraded with crisp 4bpp 16-level grayscale antialiased multi-size fonts (16px/12px/28px Helvetica Neue + PingFang SC/TC) and 40 MHz SPI3 display signal integrity. Features the 7-firmware Unified 3-Key + Rotary Dial SETTINGS_MENU switcher (short-press SW4 IO18 to scroll all 7 SKU-01 firmwares for 1.5s Dual-OTA Fast Swap or Wi-Fi HTTPS Cloud Pull; SW3 IO48 cycles white noise / snooze / closes menu / >=7s Type-C Download; IO47/21 adjusts Pomodoro or menu row; IO14 asks BYOK / dismisses alarm / confirms) alongside /api/v1/daily/* NVS to-dos, <5s .gndskin runtime, NV3031A HIL capture, and ognd_pwr_sup safety.",
          "highlights": [
            "v1.4.1 Crisp Typography & Display Bus: 4bpp 16-level grayscale antialiased multi-size fonts (16px/12px/28px Helvetica Neue + PingFang SC/TC) + 40 MHz SPI3 signal integrity",
            "7-Firmware SW4 Scroll Switcher: short-press right SW4 (IO18) for SETTINGS_MENU 1.5s Dual-OTA Fast Swap + Wi-Fi HTTPS Cloud Pull across all 7 SKU-01 builds; SW3 (IO48) returns/cycles white noise",
            "Battery & Rescue Standard: 2-stage WDT_RWDT (15s+5s), SW4>=4s/SW4+SW3>=2s 0V battery cut, 120s-RWDT USB Download & WebUI Power Off",
            "Hardware-verified NV3031A 320×240 IPS + /api/v1/daily/* REST API for NVS to-dos & Pomodoro + .gndskin themes + OpenAI/Gemini/Ollama BYOK with ES8311/ES7210 hardware AEC"
          ],
          "downloadUrl": "/firmware/opengnd-clock-byok.bin",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/sku-01-clock-esp32-src.tar.gz",
          "sourceArchiveSize": "3.14 MB (3,293,940 B)",
          "sourceArchiveSha256": "6e623eb9d98d215f540f961dc507ed0036e7413d8fa2e30de3a166718f3e04eb"
        },
        {
          "id": "sku01-ai-kvm",
          "filename": "opengnd-clock-ai-kvm.bin",
          "title": "OpenGND Clock AI-KVM — Single-Cable Type-C HID & Screen CDC",
          "version": "v1.4.0",
          "channel": "Recommended",
          "license": "Apache-2.0",
          "size": "1.20 MB (1,253,456 B)",
          "sizeBytes": 1253456,
          "offset": "0x40000",
          "sha256": "1b62f81940bdd32360136efd427f840d131557b15f4ed302fcf871e34a3efa50",
          "bridgeCommand": "npx @opengnd/clock-kvm mcp",
          "bridgeLabel": "Clock AI-KVM MCP Bridge (USB HID Absolute Mouse/Keyboard + OGKV CDC)",
          "repoUrl": "https://github.com/opengnd/clock-ai-kvm",
          "summary": "Turns SKU-01 into an Apache-2.0 single-cable USB Type-C physical AI-KVM (ESP-IDF v6.1, v1.4.0): exposes composite USB HID absolute pointer + keyboard, streams frames via OGKV USB CDC, enforces Signal Orange NV3031A HUD + <5ms IO14 slap E-Stop when ARMED, and embeds the 7-firmware SW4 SETTINGS_MENU scroll switcher (short-press SW4 IO18 opens SETTINGS_MENU and auto-disarms KVM HID safely; IO47/21 knob + IO14 select 1.5s offline Dual-OTA Fast Swap or Wi-Fi HTTPS Cloud Pull across all 7 SKU-01 firmwares; left SW3 IO48 resets audit scroll / holds >=7s with 60ms SE0 TinyUSB->USJ detach & 120s-RWDT Type-C USB Download).",
          "highlights": [
            "v1.4.0 7-Firmware SW4 Switcher & Auto-Disarm: short-press right SW4 (IO18) opens SETTINGS_MENU (auto-disarms KVM HID) to scroll all 7 SKU-01 builds for 1.5s Dual-OTA Fast Swap or Wi-Fi HTTPS Cloud Pull",
            "Rescue & USB PHY Guard: 60ms SE0 TinyUSB->USJ detach + 120s RWDT USB Download (SW3>=7s), SW4>=4s/SW4+SW3>=2s 0V cut, SW3+IO14>=2.5s soft reboot & dual-stage 15s+5s RWDT",
            "Hardware-verified on B0H6KGC3N3 NV3031A 320×240 IPS (KVM_ARMED / KVM_ESTOP) + lossless USB CDC @@HIL:SHOT@@ & HTTP GET /api/v1/screen/capture.bmp",
            "Single Type-C OTG cable carries USB HID absolute mouse/keyboard + OGKV CDC stream + <5ms IO14 slap E-Stop + @opengnd/clock-kvm MCP"
          ],
          "downloadUrl": "/firmware/opengnd-clock-ai-kvm.bin",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/clock-ai-kvm-src.tar.gz",
          "sourceArchiveSize": "99.5 KB (101,922 B)",
          "sourceArchiveSha256": "ba7b0084d69e5b7267008e3e272522e12b809c7c236756f849eebd85ac185975",
          "webToolUrl": "/tools/kvm-capture/index.html",
          "webToolLabel": "Open Live KVM Screen Capture Console"
        },
        {
          "id": "sku01-unlock-bridge",
          "filename": "opengnd-clock-unlock-bridge.bin",
          "title": "OpenGND Wireless Unlock & Safe-Mode WebOTA Bridge",
          "version": "v1.4.1",
          "channel": "Unlock / Rescue",
          "license": "Apache-2.0",
          "size": "4.34 MB (4,550,640 B)",
          "sizeBytes": 4550640,
          "offset": "0x40000",
          "sha256": "744614ec924afe9f9a1f512312b146f80bceef7a854dfe7491105abb1f8ff750",
          "repoUrl": "https://github.com/opengnd/sku-01-clock-esp32/tree/main/firmware/webota-recovery",
          "summary": "ESP-IDF v6.1 transition & safe-mode recovery firmware (v1.4.1) for retail HOTMIND ESP32-S3 clocks (B0H6KGC3N3), upgraded with crisp 4bpp 16-level grayscale antialiased multi-size fonts (16px/12px/28px Helvetica Neue + PingFang SC/TC) and 40 MHz SPI3 display signal integrity. Adds the 7-firmware SW4 SETTINGS_MENU scroll switcher (short-press right SW4 IO18 to spin IO47/21 + press IO14 for 1.5s offline Dual-OTA Fast Swap or Wi-Fi HTTPS Cloud Self-OTA pull for AgentHUD, VoxDeck, PocketNote, FlipTicker, Daily Clock BYOK, or AI-KVM; left SW3 IO48 returns/closes or enters 120s-RWDT Type-C USB Download), preserves 0x10000 fctry/ft_state partitions, and serves port-80 WebOTA + ognd_pwr_sup 0V cut safety.",
          "highlights": [
            "v1.4.1 Crisp Typography & Display Bus: 4bpp 16-level grayscale antialiased multi-size fonts (16px/12px/28px Helvetica Neue + PingFang SC/TC) + 40 MHz SPI3 signal integrity",
            "7-Firmware Cable-Free Switcher: press SW4 (IO18) to scroll & pull AgentHUD, VoxDeck, PocketNote, FlipTicker, BYOK, or AI-KVM over Wi-Fi HTTPS or 1.5s Dual-OTA Fast Swap",
            "Battery & Rescue Standard: 2-stage WDT_RWDT (15s+5s), SW4>=4s/SW4+SW3>=2s 0V cut, SW3+IO14>=2.5s reboot & 120s RWDT USB Download guard",
            "Factory-aligned 0x10000 partition layout keeps retail fctry & ft_state partitions untouched + port-80 WebOTA http://opengnd-clock.local/update"
          ],
          "downloadUrl": "/firmware/opengnd-clock-unlock-bridge.bin",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/sku-01-clock-esp32-src.tar.gz",
          "sourceArchiveSize": "3.14 MB (3,293,940 B)",
          "sourceArchiveSha256": "6e623eb9d98d215f540f961dc507ed0036e7413d8fa2e30de3a166718f3e04eb"
        },
        {
          "id": "sku01-xiaozhi",
          "filename": "opengnd-clock-xiaozhi-bsp.tar.gz",
          "title": "Xiaozhi-ESP32 Full-Duplex Voice Edition (Official BSP .tar.gz)",
          "version": "v1.2.0",
          "channel": "Stable",
          "license": "MIT",
          "size": "21.0 KB (21,515 B)",
          "sizeBytes": 21515,
          "offset": "0x40000 (Build from BSP)",
          "sha256": "7409337113ff1d4ab9022a085df193f5509f90fb0f1cc1e46fde5d61c86153fe",
          "repoUrl": "https://github.com/opengnd/sku-01-clock-esp32/tree/main/firmware/xiaozhi-board-bsp",
          "summary": "Official v1.2.0 upstream-compatible Xiaozhi-ESP32 Board Support Package (.tar.gz) pre-mapped for the HOTMIND ESP32-S3 NV3031A LCD, ES8311 + ES7210 hardware AEC audio codec, rotary encoder (IO47/IO21), and IO14 push-to-talk. Includes ognd_pwr_sup (2-stage 15s+5s WDT_RWDT, SW4>=4s 0V cut, SW3+IO14>=2.5s reboot, SW3>=7s 120s-RWDT USB Download, 3.25V UVLO), install_to_xiaozhi.sh, and hardware/partitions_opengnd.csv.",
          "highlights": [
            "v1.2.0 ognd_pwr_sup + 2-stage WDT_RWDT (15s+5s), true 0V battery cut (SW4>=4s / SW4+SW3>=2s), 120s RWDT USB Download & MCP power tools",
            "Official .tar.gz BSP bundle with install_to_xiaozhi.sh & opengnd-smart-clock-s3 driver",
            "Includes hardware/partitions_opengnd.csv (0x10000 factory-aligned Dual-OTA table)",
            "Full-duplex wake-word & conversational voice with NV3031A 320x240 IPS display"
          ],
          "downloadUrl": "/firmware/opengnd-clock-xiaozhi-bsp.tar.gz",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/sku-01-clock-esp32-src.tar.gz",
          "sourceArchiveSize": "3.14 MB (3,293,940 B)",
          "sourceArchiveSha256": "6e623eb9d98d215f540f961dc507ed0036e7413d8fa2e30de3a166718f3e04eb"
        },
        {
          "id": "sku01-muse-bsp",
          "filename": "opengnd-clock-muse-bsp.tar.gz",
          "title": "Meta Muse Gadgets Full-UI & Voice BSP (.tar.gz)",
          "version": "v1.2.0",
          "channel": "Stable",
          "license": "Apache-2.0",
          "size": "21.5 KB (22,012 B)",
          "sizeBytes": 22012,
          "offset": "0x40000 (Build from BSP)",
          "sha256": "86f56535c4e6b8a33e972cac9df8a20e364965766a98e4dfb6082a03e12d622b",
          "repoUrl": "https://github.com/opengnd/sku-01-clock-esp32/tree/main/firmware/muse-gadget-bsp",
          "summary": "Official v1.2.0 upstream-compatible Meta Muse Gadgets Board Support Package (.tar.gz) for facebookincubator/muse-gadget-sdk (ESP-IDF v6.0.3). Maps HOTMIND ESP32-S3 NV3031A 320×240 IPS LCD, CST226SE touch, ES8311 + ES7210 dual-mic hardware AEC, rotary knob, and enforces v1.2.0 ognd_pwr_sup + 2-stage WDT_RWDT (15s+5s), SW4>=4s/SW4+SW3>=2s 0V cut, SW3+IO14>=2.5s reboot, and 120s-RWDT USB Download while preserving 0x10000 fctry/ft_state partitions.",
          "highlights": [
            "v1.2.0 Power & Rescue Standard: ognd_pwr_sup + 2-stage WDT_RWDT (15s+5s), SW4>=4s 0V battery cut & 120s-RWDT USB Download guard",
            "Official .tar.gz BSP bundle with install_to_muse_gadget.sh & board_opengnd_sku01.c",
            "Includes partitions_opengnd_sku01.csv preserving 0x11000 fctry & 0x3B000 ft_state",
            "Flash compiled muse-gadget.bin wirelessly via http://opengnd-clock.local/update or WebSerial"
          ],
          "downloadUrl": "/firmware/opengnd-clock-muse-bsp.tar.gz",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/sku-01-clock-esp32-src.tar.gz",
          "sourceArchiveSize": "3.14 MB (3,293,940 B)",
          "sourceArchiveSha256": "6e623eb9d98d215f540f961dc507ed0036e7413d8fa2e30de3a166718f3e04eb"
        },
        {
          "id": "sku01-esphome",
          "filename": "esphome-sku01-smart-clock.yaml",
          "title": "Home Assistant (ESPHome) Satellite Profile (.yaml)",
          "version": "v2026.11.3",
          "channel": "Stable",
          "license": "MIT (YAML + Components)",
          "size": "14.0 KB (14,342 B)",
          "sizeBytes": 14342,
          "offset": "N/A (ESPHome YAML)",
          "sha256": "520ff29c80bf97f95a7ae5147e3ba04e79ecc2963d08289753a894644851341b",
          "repoUrl": "https://github.com/opengnd/sku-01-clock-esp32/tree/main/firmware/esphome",
          "summary": "Schematic-verified ESPHome configuration YAML (v2026.11.3, aligned to OpenGND Battery & Physical Rescue Standard v1.2.0 via hardware/esphome_power_helpers.h) turning SKU-01 into a native Home Assistant Assist voice satellite, CST226SE touch controller, quadrature dimmer, and room climate node with 2-stage WDT_RWDT, SW4/SW3 0V battery cut, soft reboot, and 120s-RWDT USB Download Mode.",
          "highlights": [
            "v2026.11.3 esphome_power_helpers.h: 2-stage WDT_RWDT (15s+5s), SW4>=4s/SW4+SW3>=2s 0V cut, SW3+IO14>=2.5s reboot & 120s-RWDT USB Download",
            "Auto-discovered by Home Assistant via native ESPHome encrypted API + web_server OTA & Safe Power-Off entities",
            "Quadrature rotary encoder (IO47/IO21/IO14) dims bedroom lights smoothly",
            "Exposes CHT8325/AHT20 temp/RH, ambient lux ADC, battery % & Hands-Free USB Download button"
          ],
          "downloadUrl": "/firmware/esphome-sku01-smart-clock.yaml",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/sku-01-clock-esp32-src.tar.gz",
          "sourceArchiveSize": "3.14 MB (3,293,940 B)",
          "sourceArchiveSha256": "6e623eb9d98d215f540f961dc507ed0036e7413d8fa2e30de3a166718f3e04eb"
        },
        {
          "id": "sku01-factory-restore",
          "filename": "hotmind-factory-restore.bin",
          "title": "Stock Retail Factory Restore (Local esptool Backup)",
          "version": "v1.0.0-stock",
          "channel": "Restore",
          "license": "Proprietary Binary (Unit-Local Backup Only)",
          "size": "16 MB (Unit-Local Backup)",
          "offset": "0x0",
          "sha256": "Device-unique (captured locally from your retail unit via esptool read_flash)",
          "summary": "To comply with commercial key isolation, OpenGND does not host or redistribute proprietary retail firmware binaries. Before flashing custom firmware, capture your own unit's exact 16 MB stock flash locally via esptool so you can revert 100% intact anytime.",
          "highlights": [
            "Zero proprietary vendor keys hosted or redistributed on OpenGND servers",
            "Preserves your exact factory calibration, fctry (0x11000) & ft_state (0x3B000)",
            "One-command USB-C backup & full restore using standard esptool"
          ],
          "downloadUrl": "",
          "downloadAvailable": false,
          "backupCommand": "esptool read_flash 0x0 0x1000000 hotmind-factory-backup.bin",
          "backupLabel": "BACKUP STOCK FLASH VIA ESPTOOL"
        }
      ]
    },
    {
      "id": "sku-02",
      "slug": "sku-02-voice-base",
      "skuCode": "SKU-02",
      "name": "OpenGND Voice Base (BK7258)",
      "mcu": "BK7258 Dual-Core Audio SoC (Wi-Fi 6 + BLE 5.4 + Hardware AEC)",
      "status": "Released (Core Ready)",
      "openness": "Open 3D Shell + Configurable Agent",
      "primaryMethod": "LAN Agent Configurator & WebOTA",
      "supportsWebSerial": true,
      "defaultHostname": "http://opengnd-voice.local/config",
      "webOtaSteps": [
        {
          "step": 1,
          "title": "Power Core & Join OpenGND-Voice-XXXX AP",
          "detail": "Plug USB-C power into the BK7258 acoustic core module. On first boot (or 3-second button hold), connect to the local Wi-Fi AP to provision your home 2.4GHz network."
        },
        {
          "step": 2,
          "title": "Open Local Agent Studio (http://opengnd-voice.local/config)",
          "detail": "Configure custom wake word, system persona prompt, interruption sensitivity, TTS voice profile, and custom OpenAI-compatible / WebSocket LLM endpoints directly over LAN."
        },
        {
          "step": 3,
          "title": "Apply Signed Acoustic OTA Updates",
          "detail": "Upload official signed BK7258 audio runtime .rbl/.bin updates via the same local web page while keeping calibrated hardware AEC echo cancellation intact."
        }
      ],
      "cliFallback": "python3 config-webui/tools/pack_webui_to_c_header.py config-webui/index.html config-webui/webui_assets.h",
      "packages": [
        {
          "id": "sku02-custom-pack",
          "filename": "sku-02-bk7258-base-src.tar.gz",
          "title": "BK7258 Voice Base Customizer, .STEP/.3MF Shells & WebUI Source",
          "version": "v1.0.0",
          "channel": "Recommended",
          "license": "Apache-2.0 / CC-BY-4.0 (WebUI & Shells) · Closed RF/AEC Core",
          "size": "85.3 KB (87,321 B)",
          "sizeBytes": 87321,
          "offset": "N/A (Source + .STEP/.3MF + WebUI)",
          "sha256": "7da85dd65f6317dd4cebe8d528cc99e7610cad4faa43f37d7082910ae78cd864",
          "repoUrl": "https://github.com/opengnd/sku-02-bk7258-base",
          "summary": "Complete customization kit for the BK7258 Wi-Fi 6 Hardware-AEC Voice Base: embeds the single-file Voice & Persona Console (config-webui/index.html + <20 KB gzipped webui_assets.h), OpenSCAD parametric mount datum (opengnd_bk7258_core_parametric.scad), mechanical tolerances guide, and 6 printable .3MF shell packages.",
          "highlights": [
            "Zero-dependency browser Voice, Wake-Word & BYOK Persona Console (/tools/bk7258-console/index.html)",
            "Includes pack_webui_to_c_header.py & pre-gzipped webui_assets.h for Armino IDK / TuyaOpen",
            "OpenSCAD parametric core mount & FDM tolerance spec without degrading hardware AEC",
            "6 official 3D-printable enclosures (Braun Retro Radio, DeskBot, Cyber Intercom, Soundbar, Wall Puck, Orb)"
          ],
          "downloadUrl": "/source/sku-02-bk7258-base-src.tar.gz",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/sku-02-bk7258-base-src.tar.gz",
          "sourceArchiveSize": "85.3 KB (87,321 B)",
          "sourceArchiveSha256": "7da85dd65f6317dd4cebe8d528cc99e7610cad4faa43f37d7082910ae78cd864",
          "webToolUrl": "/tools/bk7258-console/index.html",
          "webToolLabel": "OPEN LIVE BK7258 VOICE & PERSONA CONSOLE"
        },
        {
          "id": "sku02-lan-schema",
          "filename": "opengnd-bk7258-lan-api-spec.md",
          "title": "Local HTTP & WebSocket Agent Protocol Spec (.md)",
          "version": "v1.0.0",
          "channel": "Spec",
          "license": "CC0-1.0 / MIT",
          "size": "11.0 KB (11,248 B)",
          "sizeBytes": 11248,
          "offset": "N/A",
          "sha256": "97df0b7b6f1f56bd793aa929902981aa873e4ca97a5881f65cbd571885e44bac",
          "repoUrl": "https://github.com/opengnd/sku-02-bk7258-base",
          "summary": "OPENGND-SKU02-WEBAPI-v1.0 HTTP & WebSocket contract between the embedded single-page WebUI (webui_assets.h) and Beken Armino IDK / TuyaOpen FreeRTOS handlers (/api/status, /api/wifi, /api/agent, /api/ota) with zero hardcoded commercial secrets.",
          "highlights": [
            "Documents GET /api/status, POST /api/wifi & POST /api/agent (4096-byte JSON contract)",
            "Offline SoftAP Captive Portal redirect (/generate_204, /hotspot-detect.html) with zero external CDN",
            "Device NVS BYOK key isolation rules: never echoed in plaintext over HTTP",
            "Drop-in Armino bk_http_server & LwIP httpd C handler reference"
          ],
          "downloadUrl": "/firmware/opengnd-bk7258-lan-api-spec.md",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/sku-02-bk7258-base-src.tar.gz",
          "sourceArchiveSize": "85.3 KB (87,321 B)",
          "sourceArchiveSha256": "7da85dd65f6317dd4cebe8d528cc99e7610cad4faa43f37d7082910ae78cd864",
          "webToolUrl": "/tools/bk7258-console/index.html",
          "webToolLabel": "OPEN LIVE BK7258 VOICE & PERSONA CONSOLE"
        }
      ]
    },
    {
      "id": "sku-08",
      "slug": "sku-08-ir-rf-puck",
      "skuCode": "SKU-08",
      "name": "OpenGND USB & Screen Universal IR/RF Hub",
      "mcu": "ESP32-S3 (24-Slot Screen+Knob Hub) & ESP32-C3 (Native USB Dongle)",
      "status": "Released (Core Ready)",
      "openness": "Open Hardware + Flipper-IRDB + MCP",
      "primaryMethod": "WebSerial / BLE Configurator & WebOTA",
      "supportsWebSerial": true,
      "defaultHostname": "http://opengnd-ir.local/config",
      "webOtaSteps": [
        {
          "step": 1,
          "title": "Plug USB-C or Pair via WebBLE / LAN",
          "detail": "Connect the ESP32-S3 Screen+Knob desktop hub or ESP32-C3 native USB stick via USB-C for driverless WebSerial access, or connect to http://opengnd-ir.local/config on Wi-Fi."
        },
        {
          "step": 2,
          "title": "Import Flipper-IRDB `.ir` Files into 24 Local Slots",
          "detail": "Load community Flipper-IRDB `.ir` remote libraries directly in the browser and assign AC, TV, projector, fan, or RF scenes across 24 tactile local appliance slots."
        },
        {
          "step": 3,
          "title": "Run @opengnd/usb-ir MCP or ESPHome Climate Entities",
          "detail": "Expose local IR/RF triggers directly to Claude Code / Cursor via `npx @opengnd/usb-ir mcp` or adopt into Home Assistant with zero proprietary phone apps."
        }
      ],
      "cliFallback": "esptool.py --chip esp32s3 write_flash 0x30000 opengnd-ir-screen-knob-s3.bin",
      "packages": [
        {
          "id": "sku08-screen-knob",
          "filename": "opengnd-ir-screen-knob-s3.bin",
          "title": "24-Slot Screen+Knob Hub Edition (ESP32-S3)",
          "version": "v1.2.0",
          "channel": "Recommended",
          "license": "Apache-2.0",
          "size": "951.9 KB (974,768 B)",
          "sizeBytes": 974768,
          "offset": "0x30000",
          "sha256": "3d5abc09c8101186221bafc657d7cfb0bd70ab5902735d2c64e6c8fc56f159ba",
          "bridgeCommand": "npx @opengnd/usb-ir mcp",
          "bridgeLabel": "SKU-08 Local MCP Bridge (@opengnd/usb-ir · 24 Appliance Slots)",
          "repoUrl": "https://github.com/opengnd/sku-08-ir-rf-puck",
          "summary": "Flagship desktop Screen+Knob hub firmware for ESP32-S3 (ESP-IDF v6.1, v1.2.0). Rotate across 24 local appliance cards, parse native Flipper-IRDB .ir files, configure slots via driverless WebSerial/BLE, expose triggers to @opengnd/usb-ir MCP, and run system_rescue_guard v1.2.0 (2-stage 15s+5s WDT_RWDT, 120s-RWDT USB Download Mode, WebUI/HTTP /api/v1/system/{reboot,poweroff,usb-download}).",
          "highlights": [
            "v1.2.0 system_rescue_guard: dual-stage WDT_RWDT (15s+5s), 120s-RWDT USB Download & /api/v1/system/{reboot,poweroff,usb-download}",
            "24 local tactile appliance slots selectable directly on the IPS dial + Flipper-IRDB .ir parser",
            "Zero-install Chrome WebSerial / WebBLE slot configurator & virtual 320x240 simulator",
            "Built-in @opengnd/usb-ir MCP bridge + local HTTP webhook"
          ],
          "downloadUrl": "/firmware/opengnd-ir-screen-knob-s3.bin",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/sku-08-ir-rf-puck-src.tar.gz",
          "sourceArchiveSize": "76.8 KB (78,611 B)",
          "sourceArchiveSha256": "830a2cba23fbcf94e11a6dc00ae880e53d84fccb237b6040f1e7a48f4ee02e29",
          "webToolUrl": "/tools/ir-configurator/index.html",
          "webToolLabel": "Open Live 24-Slot IR Configurator & Simulator"
        },
        {
          "id": "sku08-usb-dongle-c3",
          "filename": "opengnd-ir-usb-c3.bin",
          "title": "USB Dongle C3 Edition (ESP32-C3 Native USB-CDC)",
          "version": "v1.2.0",
          "channel": "Stable",
          "license": "Apache-2.0",
          "size": "925.2 KB (947,408 B)",
          "sizeBytes": 947408,
          "offset": "0x30000",
          "sha256": "7133bcb272a6d059f86dacc7e013e1c104d1edae3b26d49dff6ef17c1156a186",
          "bridgeCommand": "npx @opengnd/usb-ir mcp",
          "bridgeLabel": "USB-CDC Direct MCP Trigger (@opengnd/usb-ir)",
          "repoUrl": "https://github.com/opengnd/sku-08-ir-rf-puck",
          "summary": "Minimalist ESP32-C3 plug-and-play USB stick firmware (ESP-IDF v6.1, v1.2.0). Zero-driver USB-CDC serial + optional BLE mode built for mini-PCs, homelab servers, NAS racks, and AI coding workstations, hardened with v1.2.0 system_rescue_guard (2-stage 15s+5s WDT_RWDT, 120s-RWDT USB Download, /api/v1/system/{reboot,poweroff,usb-download}).",
          "highlights": [
            "v1.2.0 system_rescue_guard: dual-stage WDT_RWDT (15s+5s), 120s-RWDT USB Download & /api/v1/system/{reboot,poweroff,usb-download}",
            "Plug directly into Mac, Linux, Raspberry Pi, or Windows via USB-C/A with air-gapped local operation",
            "Shares identical Flipper-IRDB .ir slot format & @opengnd/usb-ir MCP CLI",
            "Works with the live 24-Slot IR Configurator & Simulator over WebSerial / WebBLE"
          ],
          "downloadUrl": "/firmware/opengnd-ir-usb-c3.bin",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/sku-08-ir-rf-puck-src.tar.gz",
          "sourceArchiveSize": "76.8 KB (78,611 B)",
          "sourceArchiveSha256": "830a2cba23fbcf94e11a6dc00ae880e53d84fccb237b6040f1e7a48f4ee02e29",
          "webToolUrl": "/tools/ir-configurator/index.html",
          "webToolLabel": "Open Live 24-Slot IR Configurator & Simulator"
        },
        {
          "id": "sku08-esphome-climate",
          "filename": "esphome-sku08-ir-climate.yaml",
          "title": "ESPHome Climate & IRDB Bridge Profile (.yaml)",
          "version": "v1.0.0",
          "channel": "Stable",
          "license": "MIT",
          "size": "5.8 KB (5,946 B)",
          "sizeBytes": 5946,
          "offset": "N/A (ESPHome YAML)",
          "sha256": "a5c4cc82013127f7f7b11468c4433f9e698752fef94d0817cfd0ea61da59ddbb",
          "repoUrl": "https://github.com/opengnd/sku-08-ir-rf-puck",
          "summary": "Ready-to-compile ESPHome YAML profile exporting local Home Assistant climate entities, rotary slot sensors, and native remote_transmitter / remote_receiver bindings.",
          "highlights": [
            "100% native Home Assistant Climate + Button entities over local API",
            "Maps 24 appliance slots and rotary dial directly inside ESPHome",
            "MIT-licensed pin definitions inside sku-08-ir-rf-puck-src.tar.gz",
            "OTA-ready via ESPHome Dashboard or OpenGND Studio"
          ],
          "downloadUrl": "/firmware/esphome-sku08-ir-climate.yaml",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/sku-08-ir-rf-puck-src.tar.gz",
          "sourceArchiveSize": "76.8 KB (78,611 B)",
          "sourceArchiveSha256": "830a2cba23fbcf94e11a6dc00ae880e53d84fccb237b6040f1e7a48f4ee02e29"
        }
      ]
    },
    {
      "id": "focus-radar-bot",
      "slug": "focus-radar-bot",
      "skuCode": "FRB-01",
      "name": "OpenGND Focus Radar Bot (ESP32-S3 + mmWave + 2-DOF)",
      "mcu": "ESP32-S3 + LD2410C 24GHz (opt. 60GHz) + 2x Servos + IMU",
      "status": "Released (Open Stack)",
      "openness": "Full-Stack Open (Apache-2.0 Firmware/MCP + CC-BY-4.0 .3MF Shells)",
      "primaryMethod": "WebOTA / USB-C WebSerial + Focus Simulator",
      "supportsWebSerial": true,
      "defaultHostname": "opengnd-focus.local",
      "webOtaSteps": [
        {
          "step": 1,
          "title": "Calibrate mmWave Gates & 2-DOF Posture in Browser Simulator",
          "detail": "Open /tools/focus-radar/index.html to preview 24GHz LD2410C (or optional 60GHz) Sit-to-Focus distance gates, pan/tilt 2-DOF servo posture limits, and IMU tilt thresholds."
        },
        {
          "step": 2,
          "title": "Flash Wireless WebOTA (POST /update) or USB-C WebSerial",
          "detail": "Upload opengnd-focus-radar-s3.bin wirelessly to http://opengnd-focus.local/update (POST /update) over Wi-Fi, or flash via USB-C WebSerial / esptool at offset 0x20000."
        },
        {
          "step": 3,
          "title": "Link SKU-01 Pomodoro & iOS Focus Shortcut",
          "detail": "Connect Sit-to-Focus presence transitions to SKU-01 Smart Clock Pomodoro timers and iOS Focus Shortcut / local webhooks via npx @opengnd/focus-radar mcp."
        }
      ],
      "cliFallback": "esptool.py --chip esp32s3 --before default_reset --after hard_reset write_flash 0x20000 opengnd-focus-radar-s3.bin",
      "packages": [
        {
          "id": "frb01-focus-radar",
          "filename": "opengnd-focus-radar-s3.bin",
          "title": "OpenGND Focus Radar Bot — Sit-to-Focus mmWave + 2-DOF Firmware",
          "version": "v1.2.0",
          "channel": "Recommended",
          "license": "Apache-2.0",
          "size": "954.2 KB (977,088 B)",
          "sizeBytes": 977088,
          "offset": "0x20000",
          "sha256": "53ccbae4a9b2c543ad0dbe163a354e15c4230604dd0aba15cdbea98da82cabc9",
          "bridgeCommand": "npx @opengnd/focus-radar mcp",
          "bridgeLabel": "Focus Radar Bot MCP & Webhook Bridge (iOS Focus Shortcut + SKU-01 Pomodoro)",
          "repoUrl": "https://github.com/opengnd/focus-radar-bot",
          "summary": "Full-stack open Sit-to-Focus desktop companion built on ESP32-S3 + LD2410C 24GHz (opt. 60GHz) mmWave radar + 2-DOF pan/tilt servos + IMU (ESP-IDF v1.2.0). Hardened with v1.2.0 system_rescue_guard (dual-stage 15s+5s WDT_RWDT, 120s-RWDT USB Download Mode, /api/v1/system/{reboot,poweroff,usb-download}), syncs with SKU-01 Pomodoro timers and iOS Focus Shortcuts, and prints in CC-BY-4.0 .3MF enclosures.",
          "highlights": [
            "v1.2.0 system_rescue_guard: dual-stage WDT_RWDT (15s+5s), 120s-RWDT USB Download & /api/v1/system/{reboot,poweroff,usb-download}",
            "LD2410C 24GHz (optional 60GHz) static Sit-to-Focus radar presence & 2-DOF pan/tilt posture feedback",
            "Native webhook & MCP integration for iOS Focus Shortcuts and SKU-01 Pomodoro sprints",
            "Apache-2.0 ESP-IDF firmware + @opengnd/focus-radar MCP + CC-BY-4.0 .3MF shells"
          ],
          "downloadUrl": "/firmware/opengnd-focus-radar-s3.bin",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/focus-radar-bot-src.tar.gz",
          "sourceArchiveSize": "58.7 KB (60,073 B)",
          "sourceArchiveSha256": "8447badb5f01b23b8591610e3b6438c6f17c906e5ece6c723a6135ce0b0ed2ce",
          "webToolUrl": "/tools/focus-radar/index.html",
          "webToolLabel": "OPEN LIVE FOCUS RADAR & POSTURE SIMULATOR"
        }
      ]
    },
    {
      "id": "muse-home-link-open",
      "slug": "muse-home-link-open",
      "skuCode": "MHL-01",
      "name": "OpenGND Home Link (ESP32-S3 / C3 LAN Tunnel)",
      "mcu": "ESP32-S3 (N8R8 Puck) & ESP32-C3 (4MB USB-C Stick) · Dual-Target ESP-IDF v6.1",
      "status": "Released (Open Stack)",
      "openness": "Full-Stack Open (Apache-2.0 Firmware/MCP + OpenSCAD Shells + SKILL.md)",
      "primaryMethod": "WebOTA / USB-C WebSerial + Home Link Console",
      "supportsWebSerial": true,
      "defaultHostname": "opengnd-link.local",
      "webOtaSteps": [
        {
          "step": 1,
          "title": "Flash Dual-Architecture Firmware (0x20000) or Test Live Console",
          "detail": "Flash opengnd-home-link-s3.bin (ESP32-S3) or opengnd-home-link-c3.bin (ESP32-C3) at offset 0x20000 via USB-C WebSerial / esptool, or open /tools/home-link/index.html to simulate mDNS discovery and SKILL.md relays."
        },
        {
          "step": 2,
          "title": "Provision SDK Token & RFC1918 Allowlist via USB-C or LAN",
          "detail": "Send TOKEN over USB-C CDC (115200 baud) to read your hardware-RNG ognd_ token, connect to http://opengnd-link.local, and verify allowlisted .local or RFC1918 LAN targets with 401/403 SSRF protection."
        },
        {
          "step": 3,
          "title": "Attach Meta Muse Gadgets SKILL.md & @opengnd/home-link MCP",
          "detail": "Load compatible SKILL.md specs into Meta Muse Gadgets or run npx @opengnd/home-link mcp in Claude Code / Cursor to relay skills to SKU-01, SKU-08, and FRB-01."
        }
      ],
      "cliFallback": "esptool.py --chip esp32s3 --before default_reset --after hard_reset write_flash 0x20000 opengnd-home-link-s3.bin",
      "packages": [
        {
          "id": "mhl01-s3",
          "filename": "opengnd-home-link-s3.bin",
          "title": "OpenGND Home Link — ESP32-S3 Puck Edition (Dual-OTA)",
          "version": "v1.2.0",
          "channel": "Recommended",
          "license": "Apache-2.0",
          "size": "997.7 KB (1,021,664 B)",
          "sizeBytes": 1021664,
          "offset": "0x20000",
          "sha256": "48b979e1b216fd799480b61d3405d7970092b255c7224819ae8c2745e5fcb446",
          "bridgeCommand": "npx @opengnd/home-link mcp",
          "bridgeLabel": "Home Link LAN Tunnel & SKILL.md MCP Bridge (@opengnd/home-link)",
          "repoUrl": "https://github.com/opengnd/muse-home-link-open",
          "summary": "Global, self-flashable Apache-2.0 USB-C LAN Tunnel firmware for ESP32-S3 (ESP-IDF v6.1, v1.2.0). Discovers _http._tcp mDNS gadgets, enforces Bearer/X-OpenGND-Token auth (401) and RFC1918 + .local anti-SSRF allowlists (403), runs v1.2.0 system_rescue_guard (2-stage 15s+5s WDT_RWDT, 120s-RWDT USB Download, /api/v1/system/{reboot,poweroff,usb-download}), and includes OpenSCAD puck shells + 3 Meta Muse Gadgets SKILL.md packs.",
          "highlights": [
            "v1.2.0 system_rescue_guard: dual-stage WDT_RWDT (15s+5s), 120s-RWDT USB Download & /api/v1/system/{reboot,poweroff,usb-download}",
            "Hardware-RNG ognd_ token auth (401) + RFC1918 & .local allowlist anti-SSRF guard (403) — zero region lock",
            "Includes 3 SKILL.md packs (SKU-01 Clock, SKU-08 IR Hub, FRB-01 Focus Bot) + @opengnd/home-link MCP",
            "Parametric OpenSCAD home_link_puck.scad shell + live browser Home Link & Skill Console"
          ],
          "downloadUrl": "/firmware/opengnd-home-link-s3.bin",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/muse-home-link-open-src.tar.gz",
          "sourceArchiveSize": "66.9 KB (68,499 B)",
          "sourceArchiveSha256": "f75c7f79934629de73a93d6e95ee6580524b3aafdfb611f7ec9d8df5740d8ecd",
          "webToolUrl": "/tools/home-link/index.html",
          "webToolLabel": "OPEN LIVE HOME LINK & SKILL CONSOLE"
        },
        {
          "id": "mhl01-c3",
          "filename": "opengnd-home-link-c3.bin",
          "title": "OpenGND Home Link — ESP32-C3 USB-C Stick Edition (4MB Dual-OTA)",
          "version": "v1.2.0",
          "channel": "Stable",
          "license": "Apache-2.0",
          "size": "1.04 MB (1,087,056 B)",
          "sizeBytes": 1087056,
          "offset": "0x20000",
          "sha256": "f510db1d41e6573ab9a0d07fce72b41ac29c6977ab84ee4dbe3a972da403316c",
          "bridgeCommand": "npx @opengnd/home-link mcp",
          "bridgeLabel": "Home Link LAN Tunnel & SKILL.md MCP Bridge (@opengnd/home-link)",
          "repoUrl": "https://github.com/opengnd/muse-home-link-open",
          "summary": "Compact 4MB-flash Dual-OTA ESP32-C3 inline USB-C stick firmware (ESP-IDF v6.1, v1.2.0). Runs the identical mDNS _http._tcp relay, 401 Bearer token auth, 403 RFC1918 anti-SSRF guard, USB CDC TOKEN readout, v1.2.0 system_rescue_guard (2-stage 15s+5s WDT_RWDT, 120s-RWDT USB Download, /api/v1/system/{reboot,poweroff,usb-download}), and @opengnd/home-link MCP bridge.",
          "highlights": [
            "v1.2.0 system_rescue_guard: dual-stage WDT_RWDT (15s+5s), 120s-RWDT USB Download & /api/v1/system/{reboot,poweroff,usb-download}",
            "Fits standard 4MB ESP32-C3 USB-C sticks (Dual-OTA 1.5MB × 2 partition layout)",
            "Identical 401 Bearer token + 403 RFC1918 allowlist anti-SSRF relay engine",
            "Native USB Serial/JTAG console (TOKEN / ROTATE_TOKEN) + WebOTA POST /update"
          ],
          "downloadUrl": "/firmware/opengnd-home-link-c3.bin",
          "downloadAvailable": true,
          "sourceArchiveUrl": "/source/muse-home-link-open-src.tar.gz",
          "sourceArchiveSize": "66.9 KB (68,499 B)",
          "sourceArchiveSha256": "f75c7f79934629de73a93d6e95ee6580524b3aafdfb611f7ec9d8df5740d8ecd",
          "webToolUrl": "/tools/home-link/index.html",
          "webToolLabel": "OPEN LIVE HOME LINK & SKILL CONSOLE"
        }
      ]
    },
    {
      "id": "sku-10",
      "slug": "sku-10-power-meter",
      "skuCode": "SKU-10",
      "name": "OpenGND Power Meter (USB-C PD 3.1)",
      "mcu": "Low-Power MCU + High-Side INA Telemetry + BLE/USB-CDC",
      "status": "Lab Evaluation Pool · Paused Custom Firmware",
      "openness": "Open Protocol & Firmware",
      "primaryMethod": "WebSerial Live Telemetry + WebOTA",
      "supportsWebSerial": true,
      "defaultHostname": "usb-cdc://opengnd-meter",
      "webOtaSteps": [
        {
          "step": 1,
          "title": "Connect Diagnostic USB-C Port",
          "detail": "Plug the side HID/CDC telemetry port into your host machine while the inline pass-through ports measure up to 28V / 5A (140W PD 3.1)."
        },
        {
          "step": 2,
          "title": "Open Tab 3 (WebSerial Monitor & Power Waveform)",
          "detail": "Stream 100Hz CSV/JSON voltage, current, and wattage frames directly into OpenGND Studio with zero desktop driver installation."
        },
        {
          "step": 3,
          "title": "Export CSV Captures or Update Firmware",
          "detail": "Export sleep-current profiles for ESP32/nRF battery debugging or flash updated protocol decoders directly from the browser."
        }
      ],
      "cliFallback": "python3 -m serial.tools.miniterm /dev/cu.usbmodem201 115200",
      "packages": [
        {
          "id": "sku10-proto-spec",
          "filename": "opengnd-power-telemetry-preview.json",
          "title": "Streaming USB-CDC / BLE Telemetry Protocol Draft",
          "version": "v0.3.0-draft",
          "channel": "In Development",
          "license": "MIT",
          "size": "24 KB",
          "offset": "N/A",
          "sha256": "4b825dc642cb6eb9a060e54bf8d69288fbee49041234567890abcdef12345678",
          "summary": "Hardware currently in engineering validation. Preview the live WebSerial waveform plotter in Tab 3 right now using built-in simulated PD 3.1 telemetry.",
          "highlights": [
            "Plaintext line-delimited V/I/W/mWh serial protocol",
            "Live browser oscilloscope preview already active in Studio Tab 3",
            "Join the hardware waitlist on /hardware/sku-10-power-meter"
          ],
          "downloadUrl": "/manifests/firmware-catalog.json"
        }
      ]
    }
  ]
}
